Need help identifying this possible 1-off concept.

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 3 of 3

Thread: Need help identifying this possible 1-off concept.

  1. #1
    Join Date
    Feb 2021
    Location
    OAK HILL, OH 45656
    Posts
    4

    Need help identifying this possible 1-off concept.

    This is the heavy duty trike with dual articulating rear wheels. It had a single cylinder Kohler snowmobile motor on it, not sure of the size but many of you could probably answer that. I'm assuming it was built with over the road use in mind as the headlight has a high/low beam, and I have 2 small turn-signals that came with it but I took off for hailing it back home. Didnr want anything else to fly off like the missing heavy gauge steel toolbox did at some point. Wenger back buy have no idea where it came loose st, but it sported 2 of these tool boxes. I may need to get a pic of the ID plate on the frame if I don't have a clear one in my gallery, but I'm about 91.73% sure it is s blank BGW Ind. Placard. Has electric start and this Apex gearbox I cannot find anything about either... model T-1101, S/N 07745. So an info on those would be awesome, like where does the shifter arm hook on to it st, etc...

    Well, that's all I can remember about it, and am stuck on restoration of it till I get some more info about it. Hopefully the pics will post. Let me know if not...
    Scott
    Attached Images

  2. #2
    Join Date
    Feb 2021
    Location
    OAK HILL, OH 45656
    Posts
    4
    I see I need to get familiar with uploading attachments here, only 3 I wanted an a couple duplicates made it on but hopefully its s good start.

  3. #3
    Join Date
    May 2009
    Location
    NJ 08533
    Posts
    5,052
    I don't know much about the 3 wheelers but looking at the design of the seat and front fender I'd lean towards Alsport.


    My new beer holder spilled some on the trails - in it's hair and down it's throat.
    Joe Camel never does that.

    Advice is free, it's the application that costs.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts