You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I pulled my tranny out in order to rebuild it because it keeps jumping out of gear. The laptop I had my manuals on has bit the big one and I cannot for the life of me find the link to it again. If anyone has one or knows the link to a transmission repair manual it would be greatly appreciated. I have not taken one apart so it is probably quite important to have one thanks
Sorry Mike, I should have put this in the Transmission forum.....not sure how now.
Last edited by AlbertaRider; 02-11-2013 at 10:37 PM.
Reason: Should have put in Transmission Forum
Thanks Moos, this should get me rolling! I had a shop manual that described the tear down and reassembly procedure, but unless the computor guru gets my laptop working I may be SOL. Im going to start ripping it apart today and hopefully the problem is REALLY evident so I know what to replace.
A/R, when you get that thing apart look very closely at the input shaft gear and the sliding gear. Maybe even take them to the dealer and do a side by side look see. It should be very apparent if there is any degredation or brinneling on the gear teeth. // RR
Gotter ripped apart...not hard to figure out the problem.. Going to do all bearings and seals while im in there. Idler(reverse?)gear and bushings. Main gear shaft and both sliding gears. Oh well, should be solid afterwards.