You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I picked up a 2000 Conquest last month after my neighborhood flooded after Hurricane Ian. Now that it's going to be more for fun and not a transportation necessity, I'd like to add an outboard motor. What are my mounting options since the manufacturer's bracket has been discontinued?
Or if someone has a 618-10 bracket they'd like to sell, please PM me.
Last edited by Wanderlust; 11-07-2022 at 03:02 PM.
What I have done as I changed models over the years and got tired of buying outboard motor brackets that were designed for long shaft was to build a unit that fit in my trailer hitch receiver with a kicker plate to raise and lower using my short shaft motors mind you not loading a heavy motor on 5hp or so and it has worked for years for me there is a pic of it in my gallery I don't know how to move it to this thread check it out.
I have a motor mount, and it's great in water. The problem is that I want to be able to drive across tuff terrain with the motor attached, but the motor mount just isn't strong enough. My Argo dealer was going to reinforce it, by somehow using the frame, but he died. I still haven't solved the problem, but I am still thinking about it.
I built a mount that goes to the 2" receiver and comes up over the "transom" to stop it deflecting and potentially bending something. The motor is on a quick mount so it just slides right in when I'm ready. I run a 4 hp mercury thunderbolt 2 stroke probley weighs about 35 - 40 pounds. No way I'm bouncing thorough the bush with it mounted.
Facemelter I the same had a 6 hp old evinrude 2 smoke that was light what I did in transport was to use a rachet strap from the motor to the seat back tube and pull any slack out of the mount and transported it in place many many miles over a 30 year period with no issue.Cheers
Posting Permissions
Reply With Quote