You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I joined the forum not knowing if you allowed 8x8 argos. My problem is that one of the axles keeps slipping out of the bearing. All the others are OK. There are only 2 set screws holding it in place. Has anyone had this problem and solved it...Thanks
pemac 1 welcome to the forum .... all the aatv's are welcome here !! glad you joined and you will get plenty of friendly help here. i have a max, so can't help you with your argo but stay tuned !! many will reply. johnboy va.
hi 1992 Argo magnum owner here,there are 2 bearings (inner,outer) and all together there are 4 set screws that bite the axle keeping bearings in place. pull the axle and tighten with blue lok-tight applied and you should be good!