You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I was doing the end of season servicing and changing the tranny fluid is of course part of that. So i warmed up the machine, pulled the plug to drain, then inserted the vacuum hose to make sure i got as much fluid as possible. Then i refilled it to the mid point on the indicator glass, as per the manual. It certainly did not take the 1.1l it was supposed to. Waited a bit and fired it up and ran it. The fluid level in the glass dropped to nothing while the machine was running (F-N-R for few minutes). Shut it off and then watched as fluid came back up in the glass...but now it is almost to the top of the glass, and it doesn't go down again.
Has anyone else experienced this? Do i drain some off? This is what, no. 4 or 5 fluid change; never noticed this before.
Reply With Quote
