You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I have a very nice set of axles and sprockets that will not work for a project I was saving them for.
These were reportedly removed from a Colt. The bolt pattern and sprocket locations do not match up with frames from Chief, ThunderChief or SuperChief frames. The front sprockets also do not line up with the brake calipers.
The axles might be home made. They are welded to (through) the wheel hubs. Each axle is 15 and 3/4 inches long which put the wheels very close to the tub. So close in fact that I'm pretty sure the left, rear wheel would have rubbed against the tub at the clutch bubble. I'm not sure if that's the case on a Colt's body.
One axle has a slight bend.
Ideally, I'd like to trade them for a decent set of axles, sprockets and wheel hubs that are compatible with a Chief, ThunderChief or SuperChief frame.
I'll be at the Hamlin race next week and I can bring them. If you're not going, maybe you know somebody who is.
Reply With Quote