You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Hello all,
I picked up my very first Attex 6x6 I think it's a chief 400. I have been rebuilding and having fun doing it.
This is what I have done:
1. Replaced the fuel pump and filter
2. Cleaned the carb.
3. Replaced the throttle cable with a Honda FL250 Odyssey throttle cable
4. made 1 front sprocket (it was missing) with a sprocket from tractor supply
5. Replaced the front chains #50 (again tractor supply)
6. Replaced the ignition switch (again tractor supply)
7. Redid the exhaust
8. Replaced the stock rimless tires with 22/11.00-8 Stryker atv tires on 8x7 5 bolt rims (with wheel adapters)
What I need to do:
1. Fix some cracks and 1 big hole where the muffler was in the tub
2. Replace axle gaskets
3. Replace at less 1 axle
4. Make front chain tensioners
5. Replace the drive belt
6. rebuild the t20 transmission (it doesn't like to go in to reverse) maybe i can get away with just replace the shifting levers.
What I want to do:
1. Mount a winch to the front
2. Mount a 2 inch receiver hitch to the back
3. Make a split shift
4. Repaint it
5. Make a roll cage (maybe)
Any help with any of the items on my list will be greatly appreciated.