You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
the original throttle setup on my max 2 was getting hard on my right hand . so i changed to horizontal handles . instead of making new complete levers , i bought 2 weld mount tubing clamps for 7/8 '' o.d. tubing from mcmaster carr ( part # 3015T26 ) i welded a 4'' long 7/8 '' o.d pipe 4'' long centered on the threaded plate side of the clamps ( take them off to weld ) . then tightened each one on the tops of the steering levers . bought a twist grip throttle set for 7/8 '' o.d. tubing with a 60 '' long throttle cable . works great and much easier on my hand . and i like the way it steers . johnboy va