2000 conquest valve train problem

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 3 of 3

Thread: 2000 conquest valve train problem

  1. #1
    Join Date
    Oct 2010
    Location
    Northern BC
    Posts
    18

    2000 conquest valve train problem

    Hello all.
    I lost compression on front cylinder of my 20hp kawasaki. One pushrod not moving when turning over and can hear/ feel gear noise.
    New engine time or serviceable? 1000 hours.
    Anyone in the neighborhood have a spare 20hp?

    Either have time and no money or money and no time!

    Thanks for your input,
    9 Toe.

  2. #2
    Join Date
    Mar 2010
    Location
    innisfil,ontario
    Posts
    1,431
    pull the heads and clean all the sticky stuff out.check to see if push rods are bent.if your good to go put it back together and set the valves.you should be golden.

  3. #3
    Join Date
    Oct 2010
    Location
    Northern BC
    Posts
    18
    Thanks for the quick response, push rods aren't bent. I assume I can do this without removing engine?

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts