You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I just put the engine back in my 93 Vanguard. In neutral the drive belt spins. Got the idle down as low as it can go and there is a gap between the belt and the side of the primary clutch. Any cure for this?
If belt is to tight it drags on the center of the drive clutch. Proper tension is to pinch the belt tight and pull away from the driven clutch. There should be 1/16 inch of clearance on center of drive clutch at least. Hope this helps.
Posting Permissions
Reply With Quote