Ashtabula is the goal. It's a trail machine for the kids.
Ashtabula is the goal. It's a trail machine for the kids.
What belt are you guys using on your Vanguards? My center to center is going to be about 14.25" minimum. That's about a 49 inch OC. I looked around but didn't see any belts that long.
Lance,
On my Tomahawk Lil Truck I'm using a Parts Unlimited LMX1116 or you can use a Dayco Max 1116 belt.
Here's a brand new one do it, dirt cheap.
http://www.ebay.com/itm/New-Dayco-Th...item2ecd99c29a
http://www.6x6world.com/forums/attex...reference.html
"Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"
Here's a 49" belt for you Lance. It's what I'm using on the blue MaxII.
HP2031 - Dayco High Performance Utility Vehicle Belt. Fits John Deere Gator HPX 2x4/4x4, Trail Gator HPX 2x4/4x4 | ATV Parts | MFG Supply
I'm using the HP2031 on the Bandolero. It's sitting on a G50B motor mount.
Banned
Thanks for the belt information. I'll let you know what I decide. I made some progress this weekend. I sand blasted the frame and primed a bunch of the parts.
Looks real nice
Is that a Metropolitan ?
1962 Metropolitan. Once I get concrete for a floor, I'll start working on it. I've had it for 15 years or so. Never had it running.
I ordered the HP2031 from MFG Supply. It was the same belt I used on my Max II with the opposed twin Briggs.
Once I get the belt, I'll be able to finalize the engine placement, finish painting and start assembly.
Looking good, Lance! It looks like you've nearly filled up the new building with projects already......time for an addition soon?
"Looks like you have a problem with your 4 wheeler........you're missin' two wheels there"