Got O rings and my copper seals coming this weekend, why pay shipping when a friend can bring them up, along with some nice snow shoes to size and see if they fit and I can use them. He picked up some Amber strobes for me too.
That being said should be a great BBQ at his place I'm stoked! May have to prep a filet mignon for dinner ROFL
Hope to heck this cures it.
Need to get this wrapped up asap so I can get the thing out and have some fun with it! I'm tired of puttering around the orchard, for fear that it will crap out and leave me stranded.
I need to get this up to Barcelo Falls and into some mud and and and..time to enjoy it for what it is. An AATV and usable machine for SAR.
Went out walked dog and decided to do some minor work. Thus I degreased and then steam cleaned the air filter housing, and surface prepped the bracket support and painted it.
Here this is where the Air filter housing will mount, leaving me access to install a clean fresh filter.
I'm thinking that a couple of support brackets and then I can drop the elbow of the muffler down the old tale pipe hole and run a tube up to the muffler quite easily. I'd have to cut the tail pipe and turn it 90 degrees as well.
Got a couple of noisy bearings to replace here
Fuel pump is mounted up nicely and working well, still have some wiring to do, but that's part of the finishing of this machine!
This is the AGM battery, and as you can see it fits under the support bar for the controls, I'd have to make a bracket to hold it in place but I think I can handle that
Hope this works here
I'm thinking under that bar or up under the very front by winch plate mount under fuel tank for battery mounting location. This here under this bar provides shortest leads to starter which is good, easiest to get too, as well. I'll have to sit on passengers side and see if it is not in the way and
Well thanks for reading
Al