What can I use for the band adjustment tools since I don't have a set what thickness are they and what can I use I took apart my trans and you can see the grease marks on the bolts but I'm reusing my bands I need some help with this one
What can I use for the band adjustment tools since I don't have a set what thickness are they and what can I use I took apart my trans and you can see the grease marks on the bolts but I'm reusing my bands I need some help with this one
I bought a set from Richards relics for $25. Worth it. Makes adjusting the bands easy.
You will need an Inch-Pounds wrench (not FOOT-pounds). I got mine off amazon.
Stand for the Flag. Kneel for the Cross.
The tools are .187 " thick. You want .312 total movement on a plunger. If you get it close and reinstall it in the chassis setting the total movement of the sticks is the best way to go. A max II should have 5.5 to 6 inches of total movement measured at top of sticks. Max IV needs 7" because the sticks are longer. Movement at transmission is the same. Hope this helps.
Posting Permissions
Reply With Quote