Originally Posted by
Canadian_Zuk
You need to properly index your tires to prevent chain windup. Argo recomends a differnt tire pressure for each position, someone will post it I'm sure. IMHO, the only way to do this properly is to measure the circumference of each tire at a set PSI (start at 5 psi) with a tape, then adjust your air pressures to equalize the circumference of all tires. I do this by letting some air out of the larger tires until they all measure the exact same circumference. I used to write down whatever PSI each tire required with a paint pen right on their respective rims. Another option to eliminate chain windup is track tuners, they are esentially free wheeling hubs you install on your center axles to turn them into idlers.