Brake disk to my 79 Max IV

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 7 of 7

Thread: Brake disk to my 79 Max IV

  1. #1
    Join Date
    Nov 2019
    Location
    Norway
    Posts
    4

    Brake disk to my 79 Max IV

    Hi guys!
    I just bought my first Max IV and realize that the brake disk are missing. calipers are there but the disks and disk attachment are gone. I’m been looking around internet to find these parts but no luck.. The brake disk are in the center of the Max. Can any one help me out please?

  2. #2
    Join Date
    May 2010
    Location
    Fairbanks AK
    Posts
    1,456
    What is the serial number? Sounds like aRIM. If brakes are above the center axle they will be hard to find. You could install newer ones on front axles.

  3. #3
    Join Date
    Nov 2019
    Location
    Norway
    Posts
    4
    Hi msafi65,
    Thank you for your reply.
    The disks are above the center axel yes. The serial number is 6347.
    I realt want the Max to be autentisk so I was hoping to find original parts

    Thanks again!

  4. #4
    Join Date
    May 2010
    Location
    Fairbanks AK
    Posts
    1,456
    I’ve seen a lot of the old max 4s. Rarely see one with intact center brakes. Many of the brackets are broken out of the frame. You will have to find used parts or fabricate them.

  5. #5
    Join Date
    Nov 2019
    Location
    Norway
    Posts
    4
    Ok, do you know we’re I can find a picture or some spec on these parts?
    If I had that I could have them made..

  6. #6
    Join Date
    Jun 2007
    Location
    Central NJ
    Posts
    1,470
    Acta non verba

  7. #7
    Join Date
    Nov 2019
    Location
    Norway
    Posts
    4
    Thank you so much!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts