Bearing problem..??

[greggv2007]

Can anyone tell me the brand and number for good bearings for an argo? Something made in North America. I am replacing some in my early 80's machine and I don't want to have to get the Chinese ones the dealer sells. The number on the one I removed is nsk en206dr . Thanks Gregg

[rocksavage]

Thanks to all who provided insight on this one..Wow this forum is a wealth of information and advise..It appears that original owner did not grease the outer bearings as it probably took too much time to remove the wheels.. Bearing seized and damaged the axle..Anyway I have replaced inner and outer with new seals now on 6 of 8 wheels and will finish up when more parts arrive..I swapped out the worn shaft with a front axle as the bearing sits in a different location due to the axle extensions(thanks Roger s). This was a simple and most importantly economical fix..They will certainly be greased in the future..

Those bolts on the inner front axles bearings are not the easiest to work at..

Thanks to all..

[lazytv]

Can anyone tell me the brand and number for good bearings for an argo? Something made in North America. I am replacing some in my early 80's machine and I don't want to have to get the Chinese ones the dealer sells. The number on the one I removed is nsk en206dr . Thanks Gregg

WHat did you end up using?