i was wondering if anyone out there has a new t-20 band and a set of dial calipers, and if so could you measure the thickness for me? i'd like to know how worn mine are before i spend the coin to replace them.
thanks guys
i was wondering if anyone out there has a new t-20 band and a set of dial calipers, and if so could you measure the thickness for me? i'd like to know how worn mine are before i spend the coin to replace them.
thanks guys
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
Took reading of my new t-20 bands was 0.109" i will take a few more readings and post them
Last edited by jeffery9076; 03-30-2009 at 09:27 PM.
thanks for posting. i replaced mine, and didn't think to measure the new onesi think i might have been in a hurry to try the machine out. that will be good info for the future
Last edited by racerone3; 03-30-2009 at 09:46 PM. Reason: i spell like a 3rd grader...
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
It has been my understanding that the bands will last years as long as the fluid level is kept up....even with heavy use.
Banned
Was waiting on a detent spring i broke when assembling the t-20 that jay from rec industries is a real good guy i think he might like his job. Very knowledgeable and helpful. The spring should be here in a few days. I put new bands and o rings and seals in mine it was in great shape bands were worn drums in good shape . It is amazing how something this old can still work and handle the torture i give and going to give it. I wish i would have rode one of these things years ago it is very hard to get into motorcycles and fourwheelers when this is the ultimate package. My monster is getting close to being done.
Last edited by jeffery9076; 03-31-2009 at 07:55 AM.
Posting Permissions
Reply With Quote