ES
Thanks for the schematic that helps. Looks like the drive clutch fixed edge should be about 3/16 or 5/16 offset inboard from the driven when static.
DH,
I looked at the clutch and it moves in and out only an 1/8 inch not the 1/4 as I previously stated. Can anyone confirm there should be no play in and out on the driven clutch?
Larry
If you matched up the fixed edges wouldn't the belt be angeled significantly as they are on opposite sides
Last edited by micmac; 09-13-2009 at 12:02 AM.
"Don't worry my Dad's a TV repairman, he has an excellent set of tools..I can fix It"