To Matt/MuddOx...
Please offer a longer input shaft for the T20.
The stub that the secondary clutch bolts onto is about two inches long, give or take. When the 780 series secondary is put on the stub it does not go the full length of the clutch hole. The stub is too short.
When the center bolt rattles off (they do this some times, even though threadlock compound is used), and the clutch wobbles badly, causing damage to the clutch center hole (it gets bigger, and doesn't fit well).
The shaft needs to be longer, enough to properly mount a 780 series clutch to. I think a longer stub would eliminate the wobble.
Thanks.
Stand for the Flag. Kneel for the Cross.