Electronic Fuel Pump needed

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 48

Thread: Electronic Fuel Pump needed

  1. #1
    Join Date
    Oct 2010
    Location
    Minnesota
    Posts
    464

    Electronic Fuel Pump needed

    I found with my new 23 hp engine that it doesn't start right away. It takes alot to get it started but once started during the day it starts mostly the rest of the day real easy. After speaking with a mechanic he had me pull the gas line off of the engine and turn it over. NO gas coming out within the first 30 seconds. He said that I should put in a electric fuel pump. Does anybody else out there run an electric fuel pump on their engine?
    Last edited by wheeler; 08-28-2013 at 08:14 PM.

  2. #2
    Join Date
    Nov 2009
    Location
    Charlotte, Mi/ Houghton Lake Mi
    Posts
    2,910
    With a fuel tank located above the motor the fuel will gravity feed to the motor mounted pump. If your fuel tank is below the motor, or specifically the fuel pump, the mechanical pump doesn't suck so well. MaxIV's with the motor mounted up high fall into this category.....as do Argo's with the tank under the driver seat.
    An electric pump mounted low will help. The reason for the hard starts is the fuel in the carb float bowl tends to evaporate from residual engine heat...and time. Using your choke even in the warm weather should help it start better.

  3. #3
    Join Date
    Oct 2010
    Location
    Minnesota
    Posts
    464
    With the choke on full it doesn't like to start. I have to hold full throttle and let it turn over until it starts (without choke). It then starts and runs great. If I install a Electric Fuel Pump won't there need to be a regulator installed also. I don't want to much pressure going to the carb. With an electric fuel pump I'm guessing I only need 2.5 to 3# pressure at the carb?

  4. #4
    Join Date
    Apr 2013
    Location
    Crestview Florida
    Posts
    550
    Why not put on one of those bulb pump things like those on outboard tanks? Give it a few squeezes and fire her right on up. Seems like I read on here somewhere that only 1 PSI was needed at the carb.

  5. #5
    Join Date
    Oct 2010
    Location
    Minnesota
    Posts
    464
    Dozerlarry
    I believe you are a genius. I shall call you Einstein. You may of just saved me about 80 bucks at the least. Great idea!!! I'm going to try it after I go to a Wedding tomorrow ughhh!

  6. #6
    Join Date
    Apr 2013
    Location
    Crestview Florida
    Posts
    550
    My friend, donations are accepted to my retirement fund! Actually I'm having the same problem and was going to get one and try it on my Max 4 tomorrow.

  7. #7
    Join Date
    Oct 2010
    Location
    Minnesota
    Posts
    464
    Donation sent. I hope 5 cents will do. I'm close to retiring (5 months) myself. I might be soliciting donations then! Ha ha. Let me know how that works with the bulb idea. I will check back with ya tomorrow.

  8. #8
    Join Date
    Apr 2013
    Location
    Crestview Florida
    Posts
    550
    Quote Originally Posted by wheeler View Post
    Donation sent. I hope 5 cents will do. I'm close to retiring (5 months) myself. I might be soliciting donations then! Ha ha. Let me know how that works with the bulb idea. I will check back with ya tomorrow.
    Hey 5 cents is a start!!!! Got my bulb pump at Wally World (only place that had them) and put it on with all new fuel lines. Gave it a squeeze or two (it got tight just like on an outboard) and she fired right on up. Oh yeah, the pump was around $20. Will send your nickel back to help.

    LB

  9. #9
    Join Date
    Jan 2008
    Location
    Vicksburg, Michigan
    Posts
    3,508
    I had a bulb pump on my tank trainer with fuel on front and motor on back the line was long. It worked good with the bulb. Hope it works for you too.

  10. #10
    Join Date
    Apr 2013
    Location
    Crestview Florida
    Posts
    550
    another point I thought of, if your engine mount fuel pump goes out the back seat rider can pump the bulb and get you in. He (or she) may not go riding with you again but it beats a long walk.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts