You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I have been taking apart an older t-20 out of an Attex, the ones with the brake rotors on em, and I have noticed some variation from your t-20 rebuild post. Mine had none of the thrust washers in it, like on the 3 planitary gears on each side, there were none. Should I put them in you think? Also I was wondering about when you have the housing empty and your looking down at where the drum rides in the housing there is a brass/copper bushing around the inside of the housing, mine is worn down to the gauge groove in it, is that something that can be replaced? Thanks! Jim