the laterals in my wild wolf were rusted in so bad that I had to cut them off. I cut 3 inches above the tube they slide into. the original plan was to put the bases in the vice and use a heat wrench and a pipe wrench to get them moving. then i found a piece of tubing with an Id the same as the OD of the laterals so I abandoned the original plan and welded a sleeve of tubing to the laterals and drilled a hole so that i could slide them over the stubs and bolt them in place
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.