You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
hi
As u have brake discs the requirement for the lube to stick with NO throw off is a must .
I use a product called ..........Rock Oil.......... ,sprays on solvent based and thin enough to get in between link plates
It then dries slightly to a tacky consistency .
This product leaves no throw off onto my discs ...
All other sprays from the motor cycle industry either were wax type or wd 40 thin but the result was all the same .
Due to cost use this on transmission chains only and maybe a brush on for the remaining chains ..