You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Last winter met with some 6X6ers in WY for some snow fun. Unloaded an my machine was running really bad. Tim (Obsessed) tossed a tiny bit of snow on the exhaust pipes and showed that the back cylinder wasn't running. He checked the spark plug wire. I put my hand down in to follow the circuit just to see what was down there and all of a sudden it started working again. It hadn't faltered like this before and hasn't since. When I got home I tried to get it to do it again. No joy.
Forward to today. I thought I would try again and see if I could get it to fail. Started it and during idle pulled the plug wire off each cylinder. There is definitely a larger RPM drop when the back cylinder is unplugged compared to the front cylinder. Thought it might be valve lash and adjusted that. Didn't fix it.
Oh yeah, tried the SP plug trick - no change.
Hmm, funky coil even fits the anecdotal freakiness.
Gotta see a friend about borrowing a compression tester...
Also thinking vacuum leak around intake manifold on that cylinder. I think WD40 sprayed around the gasket area uncovers that one. Will still check compression.
If those check out then I'm going to assume this is normal... ?
fuel ?....carb ? try spraying just alittle bit of carb cleaner down intake when running and
see if that changes the way it idles, use something that is very flamable could be a
cyl is not getting enough fuel, or still could be not getting a good spark ,my .02