You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Im installing a rotax 503 into my hustler and am using Yamaha rhino heavy duty outer axles, they need to be shortened by about 3 inches, if all 6 are shortened and re-welded do you guys think they would be strong enough with the rotax? I found a site for custom length but they are $300 a piece
Do you need to just move the wheel hub in by 3 inches? I'm not familiar with what the Rhino axles look like, but can you just cut the hub off the axle, chop your 3" off and reweld the hub on? If you're referring to cutting 3" out of the center of the axle and rewelding it together because you need to change the CV joint location, then "no". It won't hold up to any level of abuse.
Posting Permissions
Reply With Quote