3 -9/16", not 1/2". 1/2" are scrambler. Which as you would guess, Scrambler balloons wont interchange with attex unless you drill the holes out.Originally Posted by Amphiman1
Hithose old tires have 3 - 1/2" nuts on the inside of the rim....
Actual bolt size is 3/8" and fine threads on your attex. Scrambler are 5/16ths and regular ole thread, not sure on thread count.
Last edited by LarryW; 06-11-2009 at 07:19 PM.
nut sizes
gee larry, the attex's i have are all 1/2" nuts on them., mine must be pretty early then..
Well Ill check my square tubed ones. You cant get any earlier then that!!!gee larry, the attex's i have are all 1/2" nuts on them., mine must be pretty early then..
Ask Trebmaster, He was there the day I found out. Tried to put scrambler balloon on st300.
attex
I have one that even the 1/2 of the hub, the back 1/2 are slideable...when you apply the pressure of tightening the balloon tire, it presses the back 1/2 of the hub to the bearing collar
Ok well anyways, my 208tt are 9/16ths, Im assuming his is.I have one that even the 1/2 of the hub, the back 1/2 are slideable...when you apply the pressure of tightening the balloon tire, it presses the back 1/2 of the hub to the bearing collar
Kurt, bring a 1/2 and a 9/16 socket with you. But try the 9/16s first.
The hubs on my colt are like this tooI have one that even the 1/2 of the hub, the back 1/2 are slideable...when you apply the pressure of tightening the balloon tire, it presses the back 1/2 of the hub to the bearing collar
Ok, checked my old square tubes with 7/8ths inch axles and there lugs are 3/8" fine with a 9/16th nylon lock nuts.
Steve, I dont know 2nd gen machines at all so unsure of your sliding hub.
attex
Mine are first generation.... baker hills
Turns out the lugs are 9/16. Guess LarryW was right. Video of the engine running coming soon.
Attex 208tt
Last edited by arm08kn; 06-17-2009 at 05:40 PM.
Attex 208tt
Posting Permissions
Reply With Quote