I thought my machine was in pretty good shape so I had not messed with it since I got back. I did notice one loose wheel so I checked it last night when I got home from work. Turned out the bolt that holds the hub on was broken in half and the wheel was about to work its way off. I fixed it and decided to look at all the wheels. Well I had four wheels with broken bolts. I fixed them and as I was taking the machine off the jack stands I put some weight on the right rear tire and the entire axle moved. Checked it out and it was a broken bearing. Tore it apart and fixed that. I am thinking that I am done and tonight just before I came in I looked at my machine one more time and found that my left rear axle was bent. Took an hour to cut it out because it was bent so bad. I fabricated a new one and when I get home from work tomorrow I will put it all back together. LETS GO RACING BOYS!!!