FOR SALE Max II Gila Monster Springer

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 10 of 15

Thread: FOR SALE Max II Gila Monster Springer

Hybrid View

  1. #1
    Join Date
    Jun 2007
    Location
    Phoenix,Az.
    Posts
    1,629

    FOR SALE Max II Gila Monster Springer

    For those who have always wanted a first class Springer, This is it!
    This is the ultimate Max II Springer on the Planet.
    The frame was custom made and the front and rear axles we're moved out 1"
    to extend the wheel base from 50" to 52" so I could run 25" rawhides without them
    touching. The bottom tub and upper body are new.
    I also got rid of the jackshaft.
    The Springer kit is also custom with VW rabbit CV joints inner and outer.
    It has 7" of wheel travel, with custom alum. wheels.
    The springer kit alone is worth $7500.
    The Motor is built from a Big Block 35hp Briggs.
    The motor was built by Al Hodge @ Performance V-twins.
    It has twin 30mm Mikuni carbs on it and puts out 55+hp @ 6000rpms.
    The motor has an 1190 drive clutch and a team driven.
    The motor and clutches alone are valued @ $5500.
    I got 54mph on my GPS on the flats at the Glamis dunes.
    That's at the end of the dune video posted with this thread.
    It has the best of everything in it. There are no cheap $18.00 Buffalo Bearings
    in this car.
    It has a factory windshield ,and custom made top.
    Also has custom body band and 6 point roll cage and mud flaps.
    The hour meter is accurate with 55hrs.
    This Max is fast and is a great trail machine.
    I couldn't even begin to count the hrs it took to build it.
    The price is $19.500.00.
    I will not ship it.
    If interested it must be picked up in person and paid for in cash.





    I'm sure everyone is wondering why I'm selling it.
    Remember I have 5 of these, I can only ride one at a time.
    And Godzilla is the car of choice. Anyone who has gotten the chance to drive
    Godzilla knows what I'm talking about.
    Max IV's make the best Springers, ask WFO.

    whipper
    Attached Images
    Last edited by whipper-ag; 09-15-2016 at 09:07 PM.

  2. #2
    Join Date
    Jun 2007
    Location
    Phoenix,Az.
    Posts
    1,629
    I forgot this one. Here's a good Gila Monster video.



    Whipper

  3. #3
    Join Date
    May 2009
    Location
    Meadville, Pa
    Posts
    3,286
    If only it was in the budget. That's one heck of a machine!!!
    l like to buy stuff and no I don't do payments!

  4. #4
    Join Date
    Jun 2007
    Location
    Central NJ
    Posts
    1,470
    Ah heck I go and build a Max 2 springer when I should have built a Max 4 springer
    Acta non verba

  5. #5
    Join Date
    Jul 2007
    Location
    Pittsburgh, PA
    Posts
    695
    Godzilla is still a favorite build... not sure if the RIM will ever get to that level. Being able to fit on the trails for the hare scramble might be necessary too.

  6. #6
    Join Date
    Jun 2007
    Location
    Phoenix,Az.
    Posts
    1,629
    Quote Originally Posted by jerseybigfoot View Post
    Ah heck I should have built a Max 4 springer
    You still can.
    I have all the parts to build one more Springer and it has to be a Max IV
    because the side plates are already cut out and formed.
    Cost for this kit is $4800. At this price you will have to deburr all the welds and
    and sand blast it and paint it yourself. You will also have to build your own front and rear braces. This kit will have everything, wheel hubs, inner and outer CV joints,
    limiter straps (pencil sticks)LOL. heim joints, outer bearings, shocks.
    When you get it installed I will make you the outer axles after you get me the measurements I need.
    The longer wheelbase of the Max IV makes the best Springer.
    I started this kit to put on the Red Max IV I have, but decided I didn't need a 6th Springer.

    Here's a video of the MaxIV Springer kit in action.



    And you can still take a Springer in the water in this next video.
    There not that great in the water but there faster than a Mudd-Ox



    whipper
    Attached Images
    Last edited by whipper-ag; 09-15-2016 at 10:12 PM.

  7. #7
    Join Date
    Jun 2007
    Location
    Phoenix,Az.
    Posts
    1,629
    I forgot to show this video of the custom frame.
    There were a few changes after this video was taken.



    whipper

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts