You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Some 18 months ago I was able to buy a 980 tall tub machine. It was a running machine when I bought it but I knew some things weren't just right with it. Finally, I'm getting around to working on it. I'm going to pull it completely apart and rebuild it so I know what I have.
Pulled the top off a few weeks ago and today pulled the engine. So far, the rubber engine mounts weren't compressing and holding things tight, allowing the engine to rock back and forth. The T20 is only half way mounted and its actually loose in the cradle. The plungers seem a little far out of the case. I'll probably open it up just to take a look.
I'm going to take the 18 horse from this machine and drop it in my 950. The 950 has a 20 horse but I don't believe it is running as strong as it should. I just want to see if there is any noticeable difference.
As for the 980, I have a 22 horse Yanmar diesel to go in it.
Reply With Quote