'84 Max II in forward only wheels spin all the time
Welcome to 6x6 World.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I'm sure this has been addressed but after an hour of searching I was unable to find a comparable thread. My apologies if so.
Refurbing a '84 Max II. Nearly done, adjusted steering levers at the trans as they were under the dash when forward and had about a 10" throw from front to back. Since this adjustment when the trans lever is put into forward the wheels turn under power, not fast, but enough to crawl along.
In reverse this does not happen, wheels are stationary until the stick is pulled back.
The drive belt is adjusted correctly, idle is set properly and the fact it only creeps as soon as shifted into forward indicates it is probably a trans adjustment/issue, right? Maybe?
Thoughts and potential solutions appreciated. Working on this 6X6 has given me the BUG big time! I see an 8X8 project in the near future.....
Reply With Quote