1st gen Attex with Baker hill

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: 1st gen Attex with Baker hill

  1. #1
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7

    1st gen Attex with Baker hill

    I need help with my baker hill. so i adjusted my linkages to where the sticks dont hit the body anymore. but i can barely pull the sticks all the way back cause they almost hit me. i need help with this. Thanks

  2. #2
    Join Date
    Jun 2007
    Location
    Northern VA
    Posts
    2,766
    Have you adjusted the transmission pucks? There are adjustment studs on the back of the calipers. Loosen the 9/16 lock nut and turn the stud in with a 3/16 Allen wrench to the point where the play is out but the disc still turns when the stick is in the neutral (centered) position. If the pucks are in good enough shape, you'll be able to adjust the excessive movement out of the sticks.
    Stuck in the seventies- not in the swamp.

    (6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far

  3. #3
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7
    Do i need to remove the transmission?

  4. #4
    Join Date
    Jun 2007
    Location
    Northern VA
    Posts
    2,766
    No, you should be able to adjust everything in place. If you have to replace the pucks, the transmission shaft will have to be removed.
    Stuck in the seventies- not in the swamp.

    (6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far

  5. #5
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7
    i might just get new pucks. but i dont know where to get them, i already called richard and he said they are out and dont know if they are getting anymore in. so if anyone has some that would be great. or if you could tell me what material and thickness i need and ill buy it and make my own

  6. #6
    Join Date
    Jun 2007
    Location
    Northern VA
    Posts
    2,766
    That's a shame. The best results I've had were with the pucks that Richard Clark sells. I'll get you dimensions when I get home tonight, but you want a very hard brake material to make your own.
    Stuck in the seventies- not in the swamp.

    (6) Attex, a Hustler, a Super Swamp Fox, (2) Tricarts, (3) Tri-sports, a Sno-co trike, 3 Dunecycles, and a Starcraft! ...so far

  7. #7
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7
    Okay thanks. and ill try to adjust those brakes. But yes please let me know thanks

  8. #8
    Join Date
    Jul 2011
    Location
    Clarkesville, GA
    Posts
    470
    I use the medium non metallic brake lining from Mcmaster Carr. 5/16" thick. 7x7 sheet i think. I use 1 1/2 hole saw and grind down to 1 3/8 or 5/16 diameter, can't remember which.

    Mcmaster #3976K34
    Last edited by rickga; 10-17-2019 at 02:31 PM.

  9. #9
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7
    well i got my brakes adjusted ALOT better. now i gotta put a pin in some of the axle sprockets, because the axle is just turning in the sleeve and not locking up the wheels

  10. #10
    Join Date
    Oct 2019
    Location
    Northern Indiana
    Posts
    7
    Will a artic cat 340 engine work in my attex?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts