Possible Run of Attex Lower Bodies

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 2 of 2

Thread: Possible Run of Attex Lower Bodies

  1. #1
    Join Date
    Nov 2014
    Location
    Shipshewana, Indiana USA
    Posts
    122

    Possible Run of Attex Lower Bodies

    Our vendor is getting ready to vacform the Mudd-Ox bodies. While they're running our plastic, we have the opportunity to produce another run of Attex lower bodies. As these were a bit too small in the past, the plan is to let the plastic cool off on the mold longer than previously done, which will keep the bodies from shrinking down as far. It should be easier to push the frame down in the tub for tire clearance.

    In order to pay for the time required on the vacuum forming machine, labor, and transportation of the mold and the formed bodies, we will need to make at least 15 units. Cost will be $750 each.

    October 29th: Deadline to order the bodies from us.
    October 30th: We will announce if there are enough orders to run the mold.
    November 1st: If there are enough orders, payment will be due on this date. We accept credit cards.

    Please note that these bodies will be available for pickup at our facility in Shipshewana, IN, we can ship them to you via freight, or we can load them for a hired driver of your choice, such as uShip. We do not have enough room to haul these to Ashtabula as we've done in the past.

    You can contact us at 260-768-7221 between 6 am and 4:30 pm EST, or email matt@muddox.net anytime.

  2. #2
    Join Date
    Nov 2014
    Location
    Shipshewana, Indiana USA
    Posts
    122
    We did not reach 15 orders for the vintage Attex lower bodies, so we cannot run the mold.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts