1969 attex st300d $2500 Machine is in Amesbury Ma. 01913

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: 1969 attex st300d $2500 Machine is in Amesbury Ma. 01913

  1. #1
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227

    1969 attex st300d $2500 Machine is in Amesbury Ma. 01913

    This machine is almost completely restored. New tires,wheels,chains,bearings. You name it. Dupont Imron paint over plastic adhesor on the body. It was painted probably 10 years ago. Looks just as good today. Has a 1/4 inch skid plate under the belly. All metal parts were sandblasted and powder coated. Seat was professionally redone with new plywood that I poly resined. Also peaked it up in the middle a bit for my back. Bought a new 16 hp duromax motor but havent installed it. Transmission is the baker hill 7000. Had a mechanic friend replace the bearings inside and seals but 1 seal may be leaking. So to make a long story short install motor and trans and hook up wires. You can view the machine in members gallery under miked. Its called the Mud Shark. Couldn't figure out how to link pics. Sorry. Thanks for looking.

  2. #2
    Join Date
    May 2014
    Location
    VT
    Posts
    520
    Are you in Amesbury, Massachusetts?

  3. #3
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Hi AWD. Yes I am.

  4. #4
    May I ask if the st300d has a registration or paper trail so it can be registered in NY?
    Also, the brochure photos make it look small, so do you think it would be practical to climb a hill with a 6 foot 250 pound driver and companion?

  5. #5
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Hi Tour1. I sent u a pm. Thanks

  6. #6
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Added more pics to my gallery. still couldnt figure out how to link them, sorry.

  7. #7
    http://www.6x6world.com/gallery/6x6-...ex-st300d.html

    Maybe that will get there.
    It's a very nice looking machine!
    I soooooo wish I had time to see it in person.

  8. #8
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Hi tour. Thanks for putting the link up. I'll figure it out someday.

  9. #9
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Bump. Still have this machine. Price now 2200.

  10. #10
    Join Date
    Dec 2007
    Location
    amesbury.ma.
    Posts
    227
    Bump. I'll let it go for $2000. Need funds to restore a pontoon boat.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts