You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I have spark at the ignition cable to cylinder head but not spark plug when connected and grounded to cylinder head. Spark from cable to cylinder head is variant, sometimes blue, yellow or orange. It will not spark across a larger gap like 1/8 of an inch.
Assuming weak spark. Checked harness and ignition cable for any breaks. Cleaned all connections and cleaned all grounds. No luck.
I want to clean the points as I’ve read can be done with an emery board or a dollar bill. After pulling recoil and fan cover I still cannot get eyes on the armature plate where I assume the points are.
Reply With Quote