Attex roll cage

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 2 of 2

Thread: Attex roll cage

Hybrid View

  1. #1
    Join Date
    Nov 2020
    Location
    Central Wisconsin
    Posts
    10

    Attex roll cage

    Hey all, wondering what you guy's use to build your roll cage for the attex. I have a lead on some 1/16" wall steel pipe that is 1.25" in diameter. But not sure if that will work or not. Any advice will be appreciated.

  2. #2
    Join Date
    Oct 2007
    Location
    statesville, north carolina
    Posts
    2,604
    I would go with something thicker. .083 wall is as thin as I would go. 1/16 is also going to be very hard to bend without kinking unless you have access to a mandrel bender
    A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts