Installing Kohler K341 carb on Tecumseh OH160

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Results 1 to 7 of 7

Thread: Installing Kohler K341 carb on Tecumseh OH160

Threaded View

  1. #1

    Installing Kohler K341 carb on Tecumseh OH160

    Hello everyone. I just bought an early 80's Argo 6x6. It has a Tecumseh OH160 engine. I replaced the carb with a K341. I have it running decent, but the governor seems to to be hunting a lot when above idle. For those of you who have done this before, I have a few questions:

    1. Did you have to adjust or change the governor linkage? If I hold the throttle linkage with my hand it runs smooth. As soon I let the governor work, it starts hunting. This is running it in neutral with the belt off.

    2. What are the high and low speed needle settings? I adjusted the high speed to about 2.5 to 3.5 turns out, and the low speed to 1 turn out. It seems to run good. The low speed doesn't seem to make a difference. Am I way off on this?

    3. What did you do to mount the old air cleaner housing to the K341 carb?

    4. How did you connect the choke cable to the carb?

    5. Is there anything else that needs to be modified?

    Thanks.
    Last edited by trevorb; 10-04-2021 at 05:42 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts