1982 Argo stuck in high gear.

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Results 1 to 10 of 11

Thread: 1982 Argo stuck in high gear.

Threaded View

  1. #11
    Join Date
    Sep 2021
    Location
    Alberta, Canada
    Posts
    14
    I got it apart and you’re right it was tough just used a bigger hammer. Yes everything is a press fit holding the cover on. It was just a rusted double gear and splined shaft. I cleaned it up and now and it slides like new. Also the reverse idler gear was chewed up some should be replaced but bearings seem fine. Other than that just buy new seals and put back together hopefully works, thanks to all who helped! I couldn’t upload pictures to this thread but I did put some up on my gallery.
    Last edited by edrk213; 10-16-2021 at 07:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts