Busco Beach in NC, April 8th-10th, 2022

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 33 of 33

Thread: Busco Beach in NC, April 8th-10th, 2022

  1. #31
    Join Date
    Dec 2008
    Location
    Eastern PA
    Posts
    262
    I sure picked the wrong spot to lead the group into. Don't remember seeing that many machines stuck at one time. During that winchfest 2 hour 200 yard ride it should be noted that the first 150yds was from camp to the woods.
    Disappointed I had transmission issues and had to leave earlier than anticipated. Good news is most repairs were completed by Sunday.

  2. #32
    Join Date
    May 2009
    Location
    NJ 08533
    Posts
    5,049
    Quote Originally Posted by onlyonce View Post
    I sure picked the wrong spot to lead the group into. Don't remember seeing that many machines stuck at one time. During that winchfest 2 hour 200 yard ride it should be noted that the first 150yds was from camp to the woods.
    Disappointed I had transmission issues and had to leave earlier than anticipated. Good news is most repairs were completed by Sunday.
    What did you find?


    My new beer holder spilled some on the trails - in it's hair and down it's throat.
    Joe Camel never does that.

    Advice is free, it's the application that costs.

  3. #33
    Join Date
    Dec 2008
    Location
    Eastern PA
    Posts
    262
    Input shaft was cracked in half. Do the fact I am running #60 chain I had to remove that sprocket and press it onto another shaft I had. A bit surprised that happened when it did because the machine was not under any real load or shock when it snapped. I was just trying to get the machine to move.
    Last edited by onlyonce; 04-14-2022 at 04:28 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts