Right side issues

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 4 of 4

Thread: Right side issues

Hybrid View

  1. #1

    Right side issues

    Having a couple of issues with my Max IV. It doesn't like engaging the reverse. Takes several tries, a few good words, and will eventually engage. Additionally, when I yank the right stick back hard in either forward or reverse, I'm getting this snapping/clanking noise, sounds like either a chain is going over a sprocket or a gear is not engaging? Any ideas out there on where I can start looking to diagnose? Thanks.

    Jon

  2. #2
    Join Date
    Oct 2009
    Location
    Monroeton, Pa
    Posts
    284
    Pull the right shifting collar out and see if the pin in the bottom is worn.

  3. #3
    Can I do that without pulling the engine?

  4. #4
    Join Date
    Dec 2008
    Location
    Eastern PA
    Posts
    262
    Pull the engine and stand together in order to get access.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts