I?m back. This time with a max II rebuild.

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 2 of 2

Thread: I?m back. This time with a max II rebuild.

  1. #1

    I?m back. This time with a max II rebuild.

    Hi all, Im back after not posting for a few years. This time Im rebuilding a 1979 maxII.
    I purchased it as a project that was abandoned by someone else. Im all in with this one and have taken it down to the frame. Upper body and tub are in good shape. No cracks, holes or heavy fading. Thats the good part. The rest of the machine needs a bit of work. The bottom of the frame is rotted away on one side and needs replacement. The frame may also be bent and out of square. I need your input on that. Question I have is the rear of a maxII frame straight and square to the side rails of the frame? Or is it slightly bent back on both sides from the two center rails? Can somebody post a few pictures of their rear frame. Let me know. I’ll try to post some pictures also. If it turns out that the frame is bent then I will rebuild the entire outside frame heavier and stronger than the original.
    Last edited by bigtuna; 09-23-2022 at 08:27 PM.

  2. #2
    Join Date
    Feb 2013
    Location
    shenendoah valley,va.
    Posts
    2,627
    welcome back buddy ... max 2's are great machines , so it should be a fun rebuild . lot's of help here on the site for you . in terms of the square frame , i'm not sure but it seems to me what would be the reason for it not to be perfectly square when designed ? i look forward to some others input . johnboy va

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts