Picked up a Hustler not sure what model?

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 39 of 39

Thread: Picked up a Hustler not sure what model?

  1. #31
    Thanks guys!

    Not sure where the previous owner got it from but I picked it up in Steward IL. I'm just down the road in Rochelle. Glad to know there's at least 2 Hustlers in IL.

  2. #32
    Well got the new tires on. Taking the old Goodyear's off about killed me. Those things put up a fight!

    The new tires are about an inch taller and wider. Luckily the two rear clear each other but its close. Also blasted the wheels and color matched them to the body.



    It rides a little smoother now with new softer tires. So far off road it performs great, climbs hills like a mountain goat.




    Finished the exhaust body trim and added more Dynamat to a couple hot spots in the engine bay. Had to duct the main cooling fan to better direct the air flow. Drove it for 2 hours today in about 90 degree weather and the CHT's sat right were they should with no overheating of the body.


  3. #33
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    2,171
    Post up a video

  4. #34
    Noel I will try to put something together to post a video.

    So far the Hustler has been a beast! We've been wheeling it pretty hard and it continues to surprise me what it'll make it through. But found the first weak link, was deep in the middle of the woods and the left side control lever broke off. That was fun getting home. Of course it was the only thing I didn't touch during the rebuild. There were no weep holes at the bottom, it filled with water and rusted out. New tubing is on order.




    Also managed to mangle the drain tube which now leaks like crazy. I think I'll machine a more robust part rather than replace it with another boat drain.



    The project continues.
    Last edited by Nortonscustoms; 11-15-2023 at 01:31 AM.

  5. #35
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    2,171
    Argo makes the best drain plug assemblies these days. Most Hustlers only have one plug so I suggest if that is the case for yours to add a 2nd one.

  6. #36
    Thanks for the tip, I will check out the Argo plugs.

  7. #37
    Got everything fixed and made couple changes. Moved the controls over 1.5" to the right to have room for my foot. Made a new floorboard. The new laterals are a little thicker wall tube, original was 0.065" new are 0.085" wall and went with 4130 DOM. They'll last longer than me. Also made them fit into sockets and are held with locking pins. The sockets have drain holes at the bottom so hopefully they wont fill with water like the OEM setup. Can now remove the floorboard much easier as well.






    Ordered an Argo drain plug kit but was worried about it getting broken so ended up using on a boat live well.

    Made a heavy duty low profile drain setup that I think well hold up well.





    Excited to have the 980 back up and running.

  8. #38
    Join Date
    Jan 2014
    Location
    clifton IL
    Posts
    813
    Curious as to how the new tires are working?? I just picked up a 980 tall tub myself, have any of those old goodyears left by chance??

  9. #39
    Dave, so far I have no complaints. They work great in mud and seem to swim okay, well go straight that is. Turning is a bit a challenge in water. As far as the old Goodyear's, I still have all of them. They are a bit rough but have plenty of tread. Would need to run tubes. You're welcome to them if you want them.

    Couple photos "testing" the tires.






+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts