bearing lock rings?

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 3 of 3

Thread: bearing lock rings?

  1. #1

    bearing lock rings?

    hustler 950 that was submerged in salt water then sat for a year so everthing is rusted.
    trying to remove bearing from axle. is there 2 lock rings on either side of bearing in picture. if so is there any way to get replacements if i have to cut them off.bearing 2.jpgbearing 2.jpg

  2. #2
    Join Date
    Oct 2007
    Location
    statesville, north carolina
    Posts
    2,604
    the inner one is probably just a shaft collar that is held in place on the axle with a set screw. i would cut it all off and start fresh. the shaft collar isn't original to the machine. probably just to keep the axle from sliding out if the ecentric ring failed
    A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

  3. #3
    Join Date
    Feb 2013
    Location
    shenendoah valley,va.
    Posts
    2,627
    mcmaster carr co. has the 2 piece clamping shaft collars . i have them on all my axles to keep them in place . very strong and easy to install and remove without taking the axles out of the bearings . good for holding sprockets in place also if the space is there. johnboy va

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts