You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
If the crank on the tecumseh is the same 1" daimeter the clutch will fit. There both 4 strokes so as long as the bore is the same it will. I replace where a 8hp briggs is suppose to be with the same engine and I did have to move the engine over to the right some to get the belt lined up. But you may not need to do that. My problem was the 16hp powermax was so much wider then the 8 briggs.
I cant tell you off hand what your crank size is. I bet someone else here can.