You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Hey folks so while in the process of rebuilding my Vanguard, I got to thinking about securing it while hauling. So I designed a bracket that bolts to the axle flange and gives a tie down point. If you strap over the plastic I would think over time it would bow or break. I also didn't like the idea of strapping to the axles. Figured bouncing down the highway strapped by the axles may not be good for the seals and bearings. (Maybe overthinking here). Either way came up with this. Only thing I may would add or change if I ever do it again is grab the forth bolt hole. These will work on a lot of different models. The flange casting part number is 605-97. I didn't have to modify anything at all except use bolts 1/4 longer. Just thought I would share. Let me know what you guys think.