Will these work for my Attex?

[Andyman]

KIMG0308.jpgKIMG0306(1).jpgKIMG0304.jpg

I ended up deciding on the AT101s mainly because of tire clearance with the other choices not coming in 21 to clear muffler. They have been on back order but two showed up so far to give me something to play with. Still a sad day taking off the balloons, which are rollers for Eddie now.
I was able to save four old wheels off Centipede that had three bolt adapters welded in so I had to cut weld and knock them out but two where re welded a couple times and are no good now.New tires were very hard to get on beads but I always see that as a good sign.

Thanks for the advise every one, you peoples are great.

PS: At101s are made in USA so that made me happy also

[Andyman]

KIMG0349.jpg

All wheels and tires are on now and it handles and rides better than I expected. I am still at 5psi for now and it climbs my steep sandy trails in backyard with ease. Turning is nice also. Still no luck with my rain dances, it is very dry out here, so no pond splashing for me for while.

Special thanks to Don for hooking me up with two wheels and the adapters I needed to to make this happen.

[George]

Looks great Andy!

[Andyman]

Thanks George

I settled on 4 psi and they old that 4 psi a month later, nice not having to fill them up every ride anymore.

In the deep sand on a steep incline you give it little throttle and you climb right up.

I am really impressed with how well they handle at high speed on my white rock driveway, its several miles long so you can squeeze the throttle for a bit. ring ding ding