Search:

I ordered 22x11x8 tires. The rims were 8" rims x 7" wide(same as OEM).

The wheels Iremoved are the 25x12x9 Good Year Rawhide III with the stock9" rims.

I bought tracks for my Bigfoot and I needed to replace my 25" Rawhide tires and 9" rims. I recommend the following: 8" black powder coated rims from Ed at buyargo.com (aka Argo Outdoor Sports) at...

What did you search by? I can't seem to find it. Thx

Does anyone know of any tire dealer that has the Carlisle or Goodyear 22x11x8 at a low price (around $50 each)? Also, does anyone know where to get the 8" Argo rims? It seems that these things are...

Can anyone direct me to a dealer that is selling thes 22x11x8's Chevron style for a low price?

Smog,
I took a look at those Stryker 22x11x9, but I would hold back from buying another 11" wide tire. The tracks are exactly 11" wide and these would not be a loose fit. I understand the 22x10x8...

Thanks much for your great advice. I almost made this mistake. If I get a full refund, I'm going to buy the Goodyear or Carlisle tires with 8" rims and not take anymore risks, but BikeBandit doesn't...

I placed an order with BikeBandit for 22x11x9 tires to use on my newly purchased tracks. After installation, the tires are too wide for the tracks, they measure between 11.5-12" in width due to the...

Thanks for the tips. When driving the Argo onto the tracks, I noted that the tires are a bit wide and would fit into the track very tightly. Since they are tight, the track link sticks to the wheel...

The tires are brand new and are similar to Chevron, but not quite. Just FYI

I have a 6x6 Bigfoot with the 18hp B&S engine. It was doing about 18mph with the 25" wheels. I've been wanting to purchase tracks for sometime, so I finally made the investment in the 13" plastic...

Thanks Mike, your helpful insight will save me lots of $$$. Thanks for all you do.

I see some 2-ply ATV tires for my tracks that are a real good deal. I remember reading some recommendations to get 2-ply tires. What's the difference in ride between the 2 and 6 ply? :hmmmm2:

Roger,
I read that the governor mods on an Briggs is very simple. It talked about adjusting the throttle cable. Is this correct? Or do you have to pull out the engine and remove the governor?

Hey RobinHood, thanks for the post regarding making my Argo faster. I've read your response a few times and I'm now realizing that you are referring to the sprockets that are external to the...

Thank to all for your responses. Trebmaster, that makes sense now. I would love to get into the tranny and tinker with the gears, but this is something I've never done and probably shouldn't. Knowing...

I have a Bigfoot that tops around 18mph. My bigfoot has an 18hp engine. I've noted that newer 6x6's have the 23hp engine, but still claim to max around 20mph. Although it will have more torque, the...

First timer writing on this site. I purchased a 6x6 Bigfoot and have done several mechanical and cosmetic improvements. I have it running very sweet. It has the 25" Rawhide III wheels and I'd like to...