Search:

I had them on an Argo Vanguard and a Max IV. Lots of lateral traction made steering heavy and they did not swim at all. They worked well in mud as long as I didn't try any hard turns.

Edit: ...

Drive chains?

I just went through my old posts and found the belt number, its a 1092M3 Dayco Ultramax belt.

http://www.6x6world.com/forums/max-atvs/35520-looking-napa-belt-number-2.html#post199521

Let me check when I get home tonight, I think I have one I bought by mistake for my max IV. If I do have it you can have it for the cost of shipping. I'm also in Ontario.

Argo Part 10012J - 112-68 SHSS 1/4-20x1/4 KNURL PT. ZINC

http://argoparts.com/images/M82329080

the grub screw is 1/4"-20 x 1/4" long.

I'm in Ontario and bought my Carlisle AT-101s from PowerSport Place in the States, they were the cheapest and the arrived in my driveway inside a week. Your looking at $550 USD for all 6 shipped to...

Up here you can get good 2nd hand take off tracks from dealers for $50-150. You'd get 2 belt widths from the center of each if you avoided the windows.

Just a thought, but when I was considering building my own channel style tracks I had planned on using skidoo tracks for the belts. Cut some take off snowmobile tracks into 4" wide belts and the...

They all need to be the same diameter, two 22" tires from different manufacturers will more than likely measure out to different diameters. This will cause strain on the drivetrain as all axles are...

Kenda bear claws are junk on an Argo or Max, don't waste your money. I had them on an Argo Vanguard 6x6 and a Max IV. They dont swim at all and they do not skid well either. They just tear ****...

The 1-1/8" clutch is a lot more $$ than the 1", I know a few guys have bought the 1" clutch and bored it to 1-1/8" to save some cash.

Last bump. I uploaded some pics to the original post to replace the ones being held hostage by photobucket

You can also use a log for an angled up pull if you are too far from a tree. chainsaw a small hole in the ice about 30' away from your argo and wrap your winch cable around a short 2x4 or strudy...

I do most of my surfing from my phone. If I'm on my phone there is no problem because it keeps me logged in. This has to do with cookies on your computer, if you clear the cookies the error message...

6x6 world is the only forum I know that does this. Sometimes people just like to pop on to the site quickly to see if there is anything new without having to login every time. 9 out of 10 times I...

Make a body band from angle iron around the seam and tie it into the frame, ROPS or seat support to hold it up and keep it straight.

Make a catch can with a return line, it will act like a temporary holding tank and when you get level the oil will drain back into the crank case. I had to do this to my Kawasaki Brute force, it...

Maybe the condenser, test the 1st coil to make sure it's not bad.

A good friend of mine was a Metro dive cop, he saw some horrible things too. He was also my dive instructor in the 90s when I was going through all my certs.