Rusty-Gunn
Master Mudder
Registered: August 2011 Location: Kotzebue, Alaska Posts: 1,209
|
Here I made an upside down "L" bracket using 1.5" angle iron. The top end is fastened to the rear top bolts of the T-20. The bottom of the bracket is bolted to the main frame via drilled holes.
I would have prefered to have the brackets weled, or even made as a single piece, but these are bolted together at the corner using two bolts.
This idea to beef-up the mounting of the T-20 to the frame is from Amphibious Drew. He has a thread about it in the Max forum.
|