Announcement

Collapse
No announcement yet.

Welcome to 6x6 World

Collapse
X
Collapse
  •  

  • Welcome to 6x6 World

    The premier website for Amphibious ATVs. Whether this is your first time being exposed to an amphibious ATV or you are a veteran of 6x6 and 8x8 skid steers, 6x6 World has something for you. Browse the member submitted brochure section, thumb through the comprehensive photo gallery, read the how-to articles, or join us in the forums to discuss your favorite amphibious vehicle.

    We have a simple mission statement that has brought us from our inception in 2007 to where we are today: 6x6 World is dedicated to promoting the Amphibious ATV hobby in a positive and family friendly way. So come on in and join us for some mud bogging, lake cruising, hill climbing, snow drifting, skid steering fun!

    Sponsors

    6x6 World wouldn't be possible without the members and vendors that help to support this site financially. Please take a minute to visit our sponsors and let them know that you saw their ad on 6x6 World:


    Mudd-Ox Facebook Page
    Mudd-Ox/Max


    Videos

    Here are a few videos taken at some of our six wheeler rides:

    Attached Files
    Tags: None
      Posting comments is disabled.

    article_tags

    Collapse

    Latest Articles

    Collapse
    • Easy T-20 split shifter Guide
      by Rabbit929
      This is on a 94 Max II 18hp Briggs and Stratton You will need: Grinder Welder I got all my parts from tractor supply. Parts List: -1/2x1x2 inch steel bushing (anything will work but the inside diameter needs to be 1/2in) -1/2in steel pipe (hollow or solid, you only need about a foot) -shift knob of your choosing, I haven't found a matching one yet. -2 1/2in inside diameter spacers/washers (the think ones) Start by cutting the cross shaft. I cut mine an inch and a half from the ...
      10-31-2016, 05:36 PM
    • Mudd-Ox
      by Mike
      Brochures from Mudd-Ox showing their 8x8 amphibious ATVs and accessories.

      ...
      08-26-2015, 09:47 PM
    • Hoot Owners Manual
      by Mike
      A downloadable PDF of the Hoot 6x6 Owner's Manual from Knox Outdoor Products:
      ...
      01-02-2014, 06:22 PM
    • Pressure lubricating a Max throttle cable
      by MAX IV Mark
      Every time I go to start my Max in winter the throttle cable is frozen. I have a heated throttle cable but it takes about 20 min idling to get it free. I figured a good way to lube, purge the water and keep it from freezing.

      I took a condiment squeeze bottle I had laying around and filled it with antifreeze. You could put your own mixture in it if you are worried about using antifreeze.
      Removed the engine cover to get at the cable end. This engine is the 29 Kawasaki...
      01-01-2014, 12:32 AM
    • Argo Service Manual
      by Mike
      Below you will find PDF downloads of sections of the Argo Service Manual. This manual is Argo part number 673-04-1 from 2006. It covers a variety of Argo 6x6 and 8x8 ATVs manufactured since 1992 including the Conquest, Response, Bigfoot, Vanguard, Vanguard 2 and the Avenger.


      General Information Engine Electrical Brake / Steering
      ...
      04-19-2013, 05:37 PM
    • Whitman Robinson Scat
      by Mike
      Brochures on the Whitman & Robinson Scat six wheeler. The brochure mentions that the Whitman & Robinson company were manufacturers of a popular 4WD tractor called the Cayuga.

      ...
      01-22-2013, 08:28 PM
    View All
    Working...
    X