Max II Engine Replacement

Max II Engine Replacement

This article will act as a basic guide for removing and replacing the engine in a Max II AATV. Before you begin be sure that you disconnect the battery under the seat. Note: Click thumbnails to view larger photos
Start by disconnecting the ground strap and the throttle and choke cables at the motor. Then disconnect the wire at the starter solenoid, the electrical connector at the front of the engine, and the fuel line (1,2,and 3 respectively in th...

Well I finished my exhaust tonight and here is the info on what I did:

the pipe I ordered from this site
Exhaust Header U-weld Kit - BMI Karts and Supplies - Home With 2 of these kits I had all the bends I needed to make my exhaust in the size I wanted. The price was decent for mandrel bent tubing from what I've seen. I made the pipes 16 inches of 1 " O.D. pipe. I did this based on what the mower racing guys recommend. Actually they recommend 12 to 15 inches but 16 worked e...

Many 6x6 ATVs utilize small engines for power due to their availability, price, and reliablility. These engines can provide a lifetime of trouble free use if you properly maintain them. Of course anytime that you subject them to abrasive environments you will have to maintain them more frequently and if you happen to be as unfortunate as my Max II in this photo it and submerge the motor under water you should always change the oil and filters. Here I will list the recommended maintenance sched...

Here's a long over due secret.. how to replace balloon tire valve stems.. 1) break off old stem.(thats the easy part..) 2) get a package of the smaller valve stems(any auto parts store carries them ,usually.. # 413 's?) 3) this may take practice.. you need a used pair of pliars, a dull screw driver, and some quality dish soap..(full strength..) 4) slowly ..attempt to put the bottom end into the tiny hole of the wheel,after sand paper cleaning around the hole and ...

A brochure for the Aqua-Terra 6x6 amphibious ATV. It has some cool hand drawn cartoon like sketches.

(click on the thumbnails for larger images)

...

Here is an advertisement for the Otaco Bazoo Amphibious ATV. It is an ad for dealers and it reads "A little Bazoo can get you a lot of profit this year"

(click on the thumbnails for larger images)



A cool color brochure for the Bazoo 6x6!
...

Manufactured by Wheeler Mobile Ltd., the Beaver is a three wheeled amphibious ATV that claims it can climb a 60% grade and reach speeds of 40mph. The 6x6 ATV pictured in the brochure is an Aquacat manufactured by Beehoo Engineering Ltd.

...

Betton Industries Ltd. out of Streetsville Ontario manufactured this 4x4 two stroke ATV called the Bee-Line Bee-4

...

The BMB Bottmobile Boondocker is a five wheeled amphibious ATV that included a mower deck as an accessory. This brochure has several cool pictures including one that markets the boondocker as a golf cart

...

Here is a brochure for the Camel Centipede 6x6 Amphibioius ATV. It has some great pictures of this six wheeler at work and play and reads "The wonderful outdoor world of Camel". Just another cool AATV that utilizes the T20:

(click on the thumbnails for larger images)

...